Garmin G1000 Pilot's Manual page 96

WAYPOINT PAGE GROUP
Airport Runway Information Field
The Airport Runway Information field displays runway
designations, length, surface type and lighting for the
selected airport. A map image of the runway layout and
surrounding area is also displayed on the Airport Runway
Information Page. The map image range is displayed in
the lower left corner and is adjustable using the joystick.
For airports with multiple runways, information for each
runway is available.
To display information for each additional
runway:
1. Press the FMS knob to activate the cursor.
2. Turn the large FMS knob to place the cursor on
the Runway designation field.
Turn the small FMS knob to display the next
3.
runways for the selected airport.
Continue turning the small FMS knob to select
4.
the desired runway.
5. To remove the flashing cursor, press the FMS
knob.
8A-94
range and rotate it clockwise to select a higher range.
on the Airport Runway Information field:
Garmin G1000 MFD Pilot's Guide for Cessna Nav III
Rotate the joystick counterclockwise to select a lower
The following descriptions and abbreviations are used
• Type – Usage type: Public, Military or Private
• Surface – Runway surface types include: Hard,
Turf, Sealed, Gravel, Dirt, Soft, Unknown or Water
• Lighting – Runway lighting types include: No
Lights, Part Time, Full Time, Unknown or Fre-
quency (for pilot-controlled lighting)
Figure 8A.8.3 Runway Information Field
190-00392-02 Rev. A