Garmin G1000 Pilot's Manual page 81

16. As you cross the MAP, 'SUSP' is displayed in
the HSI and directly above the SUSP softkey,
indicating that automatic sequencing of
approach waypoints is suspended at the MAP.
A 'FROM' indication is displayed on the CDI,
but course guidance along the final approach
course continues. If a missed approach is
required, use the SUSP softkey to initiate the
missed approach sequence.
190-00392-02 Rev. A
Figure 8A.7.9 Accomplishing a Holding Pattern
Garmin G1000 MFD Pilot's Guide for Cessna Nav III
PROCEDURES
NOTE: Do not press the OBS softkey until you
are ready to make the turn.
NOTE:When the message 'RAIM is not available'
is displayed in the Alerts Window on the PFD a
missed approach must be executed.
8A-79