Garmin G1000 Pilot's Manual page 4

INTRODUCTION
Power-up Page Information
The Power-up Page displays general system information
such as software version and database versions to the pilot
upon power-up of the G1000 system. The Power-up Page
displays the following data:
• Product name
• System software version number
• Copyright string
• Company name
• Company web page
• Company latitude and longitude location
• Checklist filename and copyright information or text
indicating that no checklist file is present
• Land database name, version, copyright informa-
tion, and warning information if land database is
present; otherwise, if no land database is present,
text indicating that no land database is present
• Terrain database name, version, copyright informa-
tion, and warning information if terrain database is
present; otherwise, if no terrain database is present,
text indicating that no terrain database is present
• Aviation database name, version, effective dates, and
copyright information if aviation database is present;
otherwise, if no aviation database is present, text
indicating that no aviation database is present
• If the aviation database is out of date, text that states
the aviation database is out of date
• If the airframe allows pilot created pilot profiles then
the active profile is displayed
• Obstacle database name, version, copyright informa-
tion, and warning information if obstacle database
is present; otherwise, if no obstacle database is
present, text indicating that no obstacle database is
present.
8A-2
Power-up Page Operations
Setup Section). To acknowledge the Power up Page
information and proceed to the Navigation Map Page
press the ENT key or the rightmost softkey twice.
MFD BACKLIGHTING
instructions on adjusting MFD backlighting.
MFD SOFTKEYS
and provide control over flight management functions
including GPS and NAV management, engine and airframe
monitoring, terrain, and traffic. Figure 8.1.3 shows an
MFD flowchart identifying what functions are available
via the softkey labels.
Garmin G1000 MFD Pilot's Guide for Cessna Nav III
The pilot can change the active profile (see System
See the Primary Flight Display Pilot' s Guide for
The MFD softkeys are located below the display screen
The MFD softkeys perform the following functions:
ENGINE – Pressing the ENGINE softkey makes
available the LEAN and SYSTEM softkeys which
in turn access the Lean Page and the System Page,
respectively.
MAP – pressing the MAP softkey enables the follow-
ing softkeys:
TRAFFIC – pressing the TRAFFIC softkey
displays/removes Mode S Traffic on the
Navigation Map.
TOPO – pressing the TOPO softkey displays
or removes topographic information on the
Navigation Map.
TERRAIN – pressing the TERRAIN softkey
displays/removes terrain information on
the Navigation Map.
BACK – pressing the BACK softkey displays
the ENGINE and MAP top level softkeys.
190-00392-02 Rev. A