Garmin G1000 Pilot's Manual page 45

Selecting a Direct-to Destination from the Active
Flight Plan
Any waypoint contained in the flight plan may be
selected as a Direct-to destination from the Direct-to
Waypoint Page when navigating an active flight plan.
Figure 8A.5.2 Flight Plan Waypoint Direct-to
190-00392-02 Rev. A Garmin G1000 MFD Pilot's Guide for Cessna Nav III
DIRECT-TO NAVIGATION
To select a Direct-to destination from the
active flight plan:
Press the Direct-to key.The Direct-to Waypoint
1.
Page is displayed with the waypoint identifier
field highlighted.
2. Turn the large FMS knob to highlight the flight
plan 'FPL' field.
Turn the small FMS knob to display a window
3.
showing all waypoints in the active flight
plan.
Continue turning the small FMS knob to scroll
4.
through the list and highlight the desired
waypoint.
5. Press the ENT key to confirm the selected
waypoint, and ENT again to activate a Direct-
to.
8A-43