Garmin G1000 Pilot's Manual page 101

An arrival can be loaded from the Arrival Information
Page.
To load an arrival procedure from the
Arrival Information Page:
1. Select the desired arrival, transition and runway
using the steps described previously.
2. Press MENU to display the Arrival Information
Page Options.
Turn the large FMS knob to highlight 'LOAD
3.
ARRIVAL' and press the ENT key.
4. The Active Flight Plan Page is displayed. Press
FPL to return to the Airport Arrival information
Page.
190-00392-02 Rev. A
does NOT automatically alter the active flight plan leg or
Direct-to navigation. Once loaded, the arrival is simply
placed at the end of the flight plan. To manually transition
to a loaded arrival, see the procedure below (an alternative
method would be to remove the first occurrence of the
destination airport identifier).
Garmin G1000 MFD Pilot's Guide for Cessna Nav III
WAYPOINT PAGE GROUP
Loading an arrival procedure into the active flight plan
To manually transition to a loaded arrival
procedure:
1. From the Active Flight Plan Page, press the FMS
knob to activate the cursor and scroll down
through the list of loaded arrival waypoints.
2. When the desired loaded arrival waypoint
is highlighted, press the Direct-to key, then
press ENT to highlight the 'Activate' prompt
(note that any loaded arrival waypoint may be
selected).
3. Press ENT again to confirm activat
8A-99