Audio Alerts - Garmin G1000 Pilot's Manual

Audio Alerts

The Audio Alert section of the System Setup Page gives
you the option of selecting a male or female voice for au-
dio alerts.
To change the audio alert voice:
1. Select the System Setup Page.
Press the FMS knob momentarily, to activate
2.
the flashing cursor.
3. Turn the large FMS knob to highlight the
desired 'VOICE' field in the 'AUDIO ALERT'
box.
4. Turn the small FMS knob to display the options
list for the voice.
Turn the small or large FMS knob to highlight
5.
male or female.
6. Press the ENT key.
190-00392-02 Rev. A
MFD Data Bar Fields
Setup Page displays the current configuration of the Nav
data (MFD) bar fields. The Nav Data Bar Fields section of
the System Setup Page allows you to configure the four
Nav data bar fields to the following values:
Garmin G1000 MFD Pilot's Guide for Cessna Nav III
AUXILIARY PAGE GROUP
The MFD Nav Data Bar Fields section of the System
• Bearing (BRG)
• Distance (DIS)
• Desired Track (DTK)
• En Route Safe Altitude (ESA)
• Estimated Time of Arrival (ETA)
• Estimated Time En Route (ETE)
• Ground Speed (GS)
• Minimum Safe Altitude (MSA)
• Track Angle Error (TKE)
• Track (TRK)
• Vertical Speed Required (VSR)
• Crosstrack Error (XTK)
The default settings are:
• Field 1: Ground speed (GS)
• Field 2: Distance to next waypoint (DIS)
• Field 3: Estimated Time enroute (ETE)
• Field 4: Enroute Safe Altitude (ESA)
To change an MFD Data Bar Field:
1. Select the System Setup Page.
Press the FMS knob momentarily, to activate
2.
the flashing cursor.
3. Turn the large FMS knob to highlight the
desired MFD data bar field.
Turn the small FMS knob to display the options
4.
list.
5. Turn the small or large FMS knobs to highlight
the new selection.
Press the ENT key.
6.
8A-141