Placing An Original On The Platen Glass - Canon iR 3300 Reference Manual

Placing an Original on the Platen Glass

Placing an Original on the Platen Glass

Placing an Original on the Platen Glass Placing an Original on the Platen Glass
You should use the platen glass when scanning books and other bound originals, heavy or
lightweight paper originals, transparencies, etc., into memory.
NOTE
• • • •
The machine automatically detects the size of following originals: A3, A4, A4R, and A5.
1 1 1 1
1 1 1 1
Lift up the feeder/platen glass cover. Lift up the feeder/platen glass cover.
Lift up the feeder/platen glass cover. Lift up the feeder/platen glass cover.
IMPORTANT
• • • •
This machine is equipped with an open/close sensor of the feeder/platen glass cover. When placing
originals on the platen glass, lift the feeder/platen glass cover about 30cm. If the sensor does not
detach from the feeder, the size of originals may not be detected correctly.
2 2 2 2
Place your original. Place your original.
Place your original. Place your original.
1-42 1-42 1-42 1-42 Placing Originals