Setting A Standard Mode For Local Printing - Canon iR 3300 Reference Manual

Setting a Standard Mode for Local Printing

Setting a Standard Mode for Local Printing

Setting a Standard Mode for Local Printing Setting a Standard Mode for Local Printing
When you want to print documents in the Mail Box without changing the original settings set
when they were scanned, or when you want to print documents in the Mail Box sent from a
personal computer after changing the print settings, you can print using the Local Print Standard
settings set in this section. It also prints with the standard Local Print settings when you merge
multiple documents.
NOTE
• • • •
The default settings are as follows: (*indicates factory default setting.)
• Paper Select (Paper source): Auto*
• Copies: 1*
• Finisher
- With the Finisher-J1:
- Do not Collate/Collate/Offset Collate*/Group/Offset Group/Staple (Corner)
- With the Saddle Finisher G1+Inner 2way Tray-A1:
- Do not Collate/Collate*/Offset Collate/Group/Offset Group/Staple (Corner, Double)
- With the Inner 2way Tray-A1
Do not Collate/Collate*/Rotate Collate/Group/Rotate Group
- With the Saddle Finisher-G1 and Puncher Unit-J1/G1:
Do not Collate/Collate*/Offset Collate/Group/Offset Group/Staple (Corner, Double)/Hole
Punch
- With no Finisher:
Do not Collate/Collate*/Rotate Collate/Group/Rotate Group
• Two-sided Print (On/Off*)
• Erase Document After Printing (On/Off*)
• Merge Documents (On/Off*)
1 1 1 1
Call up the desired screen as follows: Call up the desired screen as follows:
Call up the desired screen as follows: Call up the desired screen as follows:
Setting Specifications That Are Common to Each Function (Common Settings)
3 3 3 3
3-27 3-27 3-27 3-27