Setting the Energy Consumption in the Sleep Mode
Setting the Energy Consumption in the Sleep Mode
Setting the Energy Consumption in the Sleep Mode
Setting the Energy Consumption in the Sleep Mode
You can set the amount of energy consumed when the machine is in the Sleep mode.
NOTE
• • • •
In the following cases, the energy consumption when the machine enters the Sleep mode is "High"
regardless of this setting. For details such as setting each function, see the Facsimile Guide, the
Network Guide, or the Printer Guide.
- "Function Keys": On
- "TCP/IP Settings" → "IP Address Settings" → "Enable DHCP": On
- "NetWare Settings": On
- "Apple Talk Settings": On
- When the time is specified, or when a transmission job is reserved, with the FAX Board attached
• • • •
The default setting is "Low"
1 1 1 1
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
2 2 2 2
Select "Low" or "High," and press "OK."
Select "Low" or "High," and press "OK."
Select "Low" or "High," and press "OK."
Select "Low" or "High," and press "OK."
3 3 3 3
Press "Done."
Press "Done."
Press "Done."
Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting Specifications That Are Common to Each Function (Common Settings)
3 3 3 3
3-19
3-19
3-19
3-19