Erasing the Department ID and Password
Erasing the Department ID and Password
Erasing the Department ID and Password
Erasing the Department ID and Password
The following instructions describe how to erase the Department ID and Password you have
stored.
NOTE
• • • •
When using Department ID Management with Card Reader-C1, you cannot erase the Department
ID.
1 1 1 1
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
4 4 4 4
When the System Manager ID/Password is set, enter the System Manager ID and System Password
after pressing "System Settings." Then, press
2 2 2 2
Press "On," and press "Store Dept. ID/Password."
Press "On," and press "Store Dept. ID/Password."
Press "On," and press "Store Dept. ID/Password."
Press "On," and press "Store Dept. ID/Password."
3 3 3 3
Use "
Use "
Use "
Use "
erase → select the Depar tment
erase
erase
erase
4-14
4-14
4-14
4-14
Setting the Department ID Management
" and "
" and "
" to display the Depar tment and its settings that you want to
" to display the Depar tment and its settings that you want to
" and "
" and "
" to display the Depar tment and its settings that you want to
" to display the Depar tment and its settings that you want to
t
s
select the Depar tment → press "Erase."
select the Depar tment
select the Depar tment
(ID).
press "Erase."
press "Erase."
press "Erase."