Setting The Time Taken To Initiate Auto Sleep After Finishing Operations; Operations; Finishing Operations - Canon iR 3300 Reference Manual

3 3 3 3
Press "OK." Press "OK."
Press "OK." Press "OK."
4 4 4 4
Press "Done." Press "Done." Press "Done." Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
Setting the Time Taken to Initiate Auto Sleep After Setting the Time Taken to Initiate Auto Sleep After
Setting the Time Taken to Initiate Auto Sleep After Setting the Time Taken to Initiate Auto Sleep After

Finishing Operations

Finishing Operations
Finishing Operations Finishing Operations
If the machine is not operated (no keys are pressed) for a certain period of time, the control
panel power switch automatically switches OFF to save power. The machine then enters the
Sleep mode.
NOTE
• • • •
The default setting is "2 minutes."
1 1 1 1
Call up the desired screen as follows: Call up the desired screen as follows: Call up the desired screen as follows: Call up the desired screen as follows:
Setting the Timer (Timer Settings)
3 3 3 3
3-35 3-35 3-35 3-35