Setting The Time Taken For The Display To Return To The Basic Features Screen After Finishing Operations - Canon iR 3300 Reference Manual

Setting the Time Taken for the Display to Return to Setting the Time Taken for the Display to Return to Setting the Time Taken for the Display to Return to Setting the Time Taken for the Display to Return to
the Basic Features Screen After Finishing Operations the Basic Features Screen After Finishing Operations the Basic Features Screen After Finishing Operations the Basic Features Screen After Finishing Operations
If the machine is not operated (no keys are pressed) for a certain period of time, the display
returns to the Basic Features screen (standard setting) of the selected function.
This period of time is called "Auto Clear Time." Auto Clear Time can be set from 1 to 9 minutes in
one-minute increments, and can also be set to "Off."
NOTE
• • • •
The default setting is "2 minutes."
• • • •
When "0" is selected, the Auto Clear function is not set.
1 1 1 1
Call up the desired screen as follows: Call up the desired screen as follows: Call up the desired screen as follows: Call up the desired screen as follows:
2 2 2 2
Enter the desired time period using "–" or "+," and press "OK." Enter the desired time period using "–" or "+," and press "OK." Enter the desired time period using "–" or "+," and press "OK." Enter the desired time period using "–" or "+," and press "OK."
The Auto Clear Time settings are from 0 to 9 minutes (in one-minute increments).
You can also enter values using
3 3 3 3
Press "Done." Press "Done." Press "Done." Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
(numeric keys).
-
Setting the Timer (Timer Settings)
3 3 3 3
3-37 3-37 3-37 3-37