Adjusting The Standard Exposure - Canon iR 3300 Reference Manual

3 3 3 3
Use " Use "
Use " Use "
3 3 3 3
The setting range is from –2.0mm to +2.0mm, in 0.25mm increments.
4 4 4 4
Press "Done." Press "Done." Press "Done." Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.

Adjusting the Standard Exposure

Adjusting the Standard Exposure

Adjusting the Standard Exposure Adjusting the Standard Exposure
Adjusts the exposure adjustment scale to calibrate differences in exposure. Perform this
adjustment if differences between the image in the original and the print occur with the exposure
scale set in the middle.
NOTE
• • • •
The default setting is in the middle on a scale of 1 to 9.
1 1 1 1
Call up the desired screen as follows: Call up the desired screen as follows: Call up the desired screen as follows: Call up the desired screen as follows:
3-42 3-42 3-42 3-42 Adjusting the Machine (Adjustment/Cleaning)
" or " " or " " to adjust the saddle stitch position, and press "OK." " to adjust the saddle stitch position, and press "OK."
" or " " or " " to adjust the saddle stitch position, and press "OK." " to adjust the saddle stitch position, and press "OK."
t s