Setting The Standard Paper For The Stack Bypass - Canon iR 3300 Reference Manual

Setting the Standard Paper for the Stack Bypass

Setting the Standard Paper for the Stack Bypass

Setting the Standard Paper for the Stack Bypass Setting the Standard Paper for the Stack Bypass
If you specify the default settings of the Stack Bypass beforehand, you can use it identically to
the paper drawers and the paper deck. This setting is useful if you always set paper of the same
size and type.
NOTE
• • • •
When using the stack bypass as a paper source for the Copy, Mail Box, and Fax functions, you must
select the stack bypass as the Auto Paper Drawer Selection.
• • • •
The default setting is "Off."
1 1 1 1
Call up the desired screen as follows: Call up the desired screen as follows:
Call up the desired screen as follows: Call up the desired screen as follows:
2 2 2 2
Select "On," and press "Store." Select "On," and press "Store."
Select "On," and press "Store." Select "On," and press "Store."
If you select "Off," proceed to step 5.
3 3 3 3
Select the paper size, and press "Next." Select the paper size, and press "Next." Select the paper size, and press "Next." Select the paper size, and press "Next."
Setting Specifications That Are Common to Each Function (Common Settings)
3 3 3 3
3-25 3-25 3-25 3-25