Setting Inch Input
Setting Inch Input
Setting Inch Input
Setting Inch Input
You can display the key for entering values in inches in the numeric entry screens.
NOTE
• • • •
The default setting is "Off."
1 1 1 1
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
Call up the desired screen as follows:
3 3 3 3
2 2 2 2
Select "On" or "Off," and press "OK."
Select "On" or "Off," and press "OK."
Select "On" or "Off," and press "OK."
Select "On" or "Off," and press "OK."
3 3 3 3
Press "Done."
Press "Done."
Press "Done."
Press "Done."
Repeat this procedure.
The specified mode is set and the display returns to the Basic Features screen.
3-12
3-12
3-12
3-12
Setting Specifications That Are Common to Each Function (Common Settings)