S R S
Driver's Airbag Replacement
Removal
1. Disconnect the battery negative cable, and wait at
least 3 minutes before beginning work.
2. Remove the access panel (A) from the steering
wheel, then disconnect the connector between the
cable reel 2P (or 4P) connector (B) and driver's
airbag 2P (or 4P) connector (C).
R
3. Remove the covers (A, B) from the steering wheel,
then remove the two Torx bolts (C) using a Torx
T30 bit. Remove the driver's airbag (D).
4. Disconnect the horn connector from the steering
wheel.
23-278