Transmission Settings - Minolta Di2010f User Manual

9.6 Transmission Settings

9.6 Transmission Settings
This section describes settings for transmission functions carried out by the admin-
istrator.
Transmission Settings
Quality/Mode Priority quality
Priority contrast
Transmission mode
(for multi-port
machines only)
Communication Transmission
menu
TSI Position
TSI Selection
Rotation transmission
Two-sided
transmission
Di2010f/Di2510f/Di3010f/Di3510f
Sets the default quality value for each operation.
The default value from the factory is "Standard".
Sets the default contrast value for each operation.
The default value from the factory is "Normal".
Sets the default transmission mode value for each
operation.
The default value from the factory is "G3-1".
Sets whether to return to memory transmission or real-time
transmission after an operation.
The default value from the factory is "Memory TX".
Sets the position of the TSI name added to transmitted
originals.
The default value from the factory is "On the Doc".
Sets the default TSI name after each operation for when
multiple TSI names are registered.
The default value from the factory is "1".
Sets whether to return to rotation transmission or not after
each operation.
The default value from the factory is "ON".
Sets the margin for two-sided transmissions.
The default value from the factory is "OFF".
9
9-13