Table of Contents
Advertisement
5.4 Registering an Image Stamp
4
Touch [Input], and then touch
desired registration key.
❍
To erase a stored image, touch
[Delete], and then touch the
number from where you wish
to delete the image.
❍
To check a stored image,
touch [Check], and then touch
the number where the image
that you wish to check is
stored.
5
Select the size of the image
document.
Touch [Enter].
To continue scanning a standard-
sized image document, skip to
step 9.
❍
To scan a non-standard-sized
image document, touch
[Custom Size].
6
Touch
.
Then, touch
select the length of side X for the
image document (between 1 inch
and 17 inch).
❍
Touch
until the cursor
moves below the fraction that
you wish to change.
7
Touch
.
Then, touch
select the length of side Y for the
image document (between 1 inch and 11-11/16 inch).
❍
Touch
until the cursor moves below the fraction that you wish to
change.
8
Touch [Enter].
Di2010f/Di2510f/Di3010f/Di3510f
and
to
and
to
5
5-35
Advertisement
Table of Contents
