Setting Document Management For Rx - Minolta Di2010f User Manual

9.10 Setting Document Management for RX

9.10 Setting Document Management for RX
This sets up the method used for managing received faxes.
RX documents are classified as "F-CODE communications", "Port RX" and "Public
Documents". Different settings may be programmed for each.
Document Management
F-CODE
Port
Public documents (those
other than F-CODE and
port)
Document Handling
Print
Forward
Print and forward
Save to box
Tip
The initial setting is Print for all types of documents.
Regardless of the setting, all documents are printed for remote copy receiving.
The order of the document management settings is "F-CODE", "RX Port" and
"Public Documents".
Di2010f/Di2510f/Di3010f/Di3510f
Sets the procedure that is performed when a document is received with an
F code. A document with an F code assigned is handled according to the
procedure specified for that F code.
Sets the procedure that is performed when documents are received at each
port (line).
Sets the procedure that is performed for a document other than an F code
transmission or a port reception.
Documents are printed as soon as they are received.
Forwards the selected received documents.
Immediately prints and forwards the selected received documents.
Received documents are saved to a box without printing.
9
9-33