Registering Telephone Numbers; How To Set Up The Fax Telephone Number Information - Minolta Di2010f User Manual

9.3 Registering Telephone Numbers

9.3 Registering Telephone Numbers
Registers the FAX telephone number, whether there is a PBX, the line type and oth-
er information required for FAX communication.
FAX Telephone Number Information
FAX telephone number
PSTN/Ext line option
Line type
Tip
Up to 20 digits can be registered for the Fax telephone number.
The destination may look at the FAX telephone number in reports or the like. We
recommend you include the area code for easy recognition by the destination.
The FAX telephone number can be changed using the same procedure as used
for registration.

How to Set up the FAX Telephone Number Information

This section describes the procedure for setting up the FAX telephone number,
PSTN/ext line option and the line type.
1
Bring up the Administrator Management screen according to "Displaying the
Administrator Management Menu" on page 9-2.
2
Touch [Admin. 1], and then touch
[Initial Settings].
Di2010f/Di2510f/Di3010f/Di3510f
Registers the telephone number for the unit.
The FAX telephone number is used when your FAX communicates its
telephone number to the destination.
Communication may not work correctly when the phone line is connected to
a PBX (private branch exchange). Set this when using a general subscriber
phone line connected through a PBX.
The initial value is set to "PSTN" (not connected to a PBX).
Sets the phone line type to match your line.
There are two types of phone lines: push button (PB) and dial pulse (DP 10
pps and DP 20 pps). If the FAX is not set correctly for the type of line used,
communication will not be possible.
The initial value is set to "DP 20" (dial pulse 20 pps).
9
9-5