To Set The "Lcd Back-Light Off" Function - Minolta Di2010f User Manual

5.3 Changing Default Settings

To set the "LCD Back-light Off" function

This function is used to specify when the backlight for the touch panel automatically
goes off after no operation is performed for the set length of time.
A copy job can even be received while the LCD backlight is off.
1
Press the [Utility] key.
2
Touch [User Set], and then touch [User's Choice].
3
Touch [3/6], and then touch [LCD
Back-light Off].
4
Press the [C] key to erase the
value.
❍
Use the 10-Key Pad to specify
the desired length of time, and
then touch [Enter].
(Specify a length of time
between 1 and 240 minutes.)
Tip
If the preheat and sleep set-
tings are short because of the
LCD Back-light being set to off, then the Backlight will be turned off after the
specified preheat or sleep time.
5
Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.
Di2010f/Di2510f/Di3010f/Di3510f
5
5-17