Laser Safety; Internal Laser Radiation - Minolta Di2010f User Manual

2
2.6

Laser Safety

This is a digital machine which operates using a laser. There is no possibility of
danger from the laser provided the machine is operated according to the
instructions in this manual.
Since radiation emitted by the laser is completely confined within protective
housing, the laser beam cannot escape from the machine during any phase of user
operation.
This machine is certified as a Class 1 laser product: This means the machine does
not produce hazardous laser radiation.

Internal Laser Radiation

Maximum Average Radiation Power: 28.9 µW at the laser aperture of the print head
unit.
Wavelength: 770-795 nm
This product employs a Class 3b laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head
unit.
The print head unit is NOT A FIELD SERVICE ITEM:
Therefore, the print head unit should not be opened under any
circumstances.
Print Head
2-8
2.6 Laser Safety
Laser Aperture of the
Print Head Unit
There is a laser aperture at the location
shown above, which must, however,
NEVER be viewed directly by the user.
Di2010f/Di2510f/Di3010f/Di3510f