9
9.12
Settings for Report Output
This allows settings to be made for administrator report output.
Report Settings
TX Report
Activity Report
How to Set up the TX Report
1
Bring up the Administrator Management screen according to "Displaying the
Administrator Management Menu" on page 9-2.
2
Touch [Admin. 1], and then touch
[Report Settings].
3
Touch [TX Report].
9-46
Specifies how to output the report for verifying FAX transmission activity.
The default value is "One destination: when there is a failure, two
destinations: when there is a failure".
Whether to automatically print the activity report every 50 communications.
9.12 Settings for Report Output
Di2010f/Di2510f/Di3010f/Di3510f