Table of Contents
Advertisement
9.12 Settings for Report Output
4
Select the TX report output
criterion, then touch [Enter].
❍
TX reports can be set to be
output separately for when
there is one and two
destinations.
ON: Select this to
automatically print a TX report
for each TX.
If TX Fail: Select this to
automatically print a TX report
only when there is a failure.
OFF: Select this so TX reports
are not automatically printed
out.
5
After verifying the entered information, touch [Enter].
6
Touch [Enter] until you return to the Utility screen, and then touch [Exit] to return
to the Basic screen.
Di2010f/Di2510f/Di3010f/Di3510f
9
9-47
Advertisement
Table of Contents
