Specifications For Receiving Long Originals (Mode 007) - Minolta Di2010f User Manual

9

Specifications for Receiving Long Originals (Mode 007)

Specifies what to do when an original is received longer than the paper. The original
can automatically be reduced or truncated if the truncated portion is small.
Settings at time of purchase
Bit
Setting
How to Set
The grayed out cells are the settings at the time of purchase.
Bit Details
7, 6, 5
4, 3, 2 Shrinks incoming documents
when they are too long so
they fit on the paper.
Specifies the upper limit of
the zoom rate (available only
when bit 1 is 0 during RX
printing).
For example, "90%" means
the document is shrunk to no
smaller than 90% of the
original size.
1 Specifies whether to shrink or
truncate an incoming
document that is too long to
fit on the paper (available
only when RX printing)
0
9-56
9.13 Configuring Functions (Soft Switches)
7 6 5 4 3 2
1 0 1 1 0 1
Setting
101
000
001
010
011
100
101
110
Other
0
1
1
1 0
0 1 (HEX: B5)
Explanation
* Do not change these bits.
100%
95%
90%
85%
80%
65%
60%
* Do not specify times other than
those above.
Shrink
Truncate
* Do not change this bit.
Di2010f/Di2510f/Di3010f/Di3510f