Rx (Reception) Settings Menu - Canon FAX-L220 User Manual

RX (Reception) SETTINGS Menu

For details on accessing the settings below, see p. 14 3.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting
ECM RX
RX MODE
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
F/T RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX
RX PAGE FOOTER
* This setting is available for certain countries only.
** Even if you have set INCOMING RING
handset or a telephone to your unit.
Chapter 14
Description
Enables/disables Error Correction Mode (ECM) during
reception.
Selects the receive mode (
FAX/TEL AUTO SW
If you select
additional sub settings ( p. 8 4).
RX MODE
When the setting is set to
MODE or FAX/TEL AUTO SW
disables ringing when the FAX receives a call.**
Selects the number of rings before the FAX begins
receiving.
When the receive mode is set to
setting determines if the FAX switches to fax receive
mode after it rings for a specified time.
If you select ON above, this setting selects the length of
time the FAX rings before switching to fax receive mode.
Enables/disables remote receiving.
ON
If you select above, this setting selects the remote
receiving ID.
Enables/disables reception of a document in the FAX's
memory when a problem occurs during reception.
Enables/disables printing of the reception date and time,
page number, and transaction number (TX/RX NO.) at the
bottom of each received fax page.
to ON , ringing will only occur if you have connected the optional
Chapter 8).
, you can select
FAX ONLY
, this setting enables/
MANUAL MODE , this
Summary of Settings
Sub Settings
ON
OFF
FAX ONLY MODE
NET SWITCH*
FAX/TEL AUTO SW
OFF
ON
2 TIMES
(1 to 99)
OFF
ON
15 SEC
(1 to 99)
ON
OFF
25
(00 to 99)
ON
OFF
OFF
ON
14 7