Rx (Reception) Settings Menu - Canon FaxPhone L80 User Manual

RX (Reception) SETTINGS Menu

For details on accessing the settings below, see p. 14-3.
Default settings are shown in bold type.
Setting
ECM RX
RX MODE
INCOMING RING
RING COUNT
MAN/AUTO SWITCH
F/T RING TIME
REMOTE RX
REMOTE RX ID
MEMORY RX
RX PAGE FOOTER
* Even if you have set INCOMING RING to ON, ringing will only occur if you have connected the handset or an
extension telephone to your machine.
Chapter 14
Description
Enables/disables Error Correction Mode (ECM) during
reception.
Selects the receive mode (1 Chapter 8).
If you select FAX/TEL AUTO SW or DRPD, you can
select additional sub-settings (1 pp. 8-4, 8-10).
When the RX MODE setting is set to FAX ONLY MODE
or FAX/TEL AUTO SW, this setting enables/disables
ringing when the machine receives a call.*
Selects the number of rings before the machine begins
receiving.
When the receive mode is set to MANUAL MODE, this
setting determines if the machine switches to fax
receive mode after it rings for a specified time.
If you select ON above, this setting selects the length of
time the machine rings before switching to fax receive
mode.
Enables/disables remote receiving.
If you select ON above, this setting selects the remote
receiving ID.
Enables/disables reception of a document in the
machine's memory when a problem occurs.
Enables/disables printing of the reception date and time,
transaction number (TX/RX NO.), and page number at
the bottom of each received fax page.
Sub-Settings
ON
OFF
FAX/TEL AUTO SW
FAX ONLY MODE
DRPD
OFF
ON
2 TIMES
(1 to 99)
OFF
ON
15 SEC
(1 to 99)
ON
OFF
25
(00 to 99)
ON
OFF
OFF
ON
Summary of Settings
14-7