RRP6.10 ROLL ASSY FEED (PL6.1.27)
Removal
1)
Remove the COVER ASSY FRONT HEAD. (RRP1.2)
2)
Remove the COVER MSI. (RRP1.11)
3)
Remove the TRAY ASSY MSI. (RRP1.12)
4)
Remove the COVER ASSY FRONT. (RRP1.13)
5)
Release the hook at one position securing the ROLL CORE MSI: RIGHT (PL6.1.26) to the SHAFT MSI
(PL6.1.28) on the CHUTE ASSY OUT (PL6.1.1) from the printer, and push down the PLATE BOTTOM
MSI (PL6.1.31) slightly to release the nip with the ROLL ASSY FEED (PL6.1.27).
6)
From the printer, push down the PLATE BOTTOM MSI (PL6.1.31) on the CHUTE ASSY OUT and
release the nip with the ROLL ASSY FEED (PL6.1.27).
7)
Slide the ROLL ASSY FEED rightward from the SHAFT MSI and pull out the ROLL ASSY FEED front-
ward.
Replacement
Replace the components in the reverse order of removal.
Chapter 3 Removal and Replacement Procedures
Figure: ROLL ASSY FEED Removal
3-205