Minolta Magicolor 3100 Series Service Manual page 171
Minolta laser printer service manual
Hide thumbs
Also See for Magicolor 3100 Series:
- User manual (204 pages) ,
- Maintenance manual (25 pages)
Table of Contents
Advertisement
RRP3.15 SENSOR PHOTO:LOW PAPER (PL3.3.3)
Removal
1)
Pull out the CASSETTE from the printer.
2)
Remove the COVER TOP MAIN. (RRP1.4)
3)
Remove the COVER SIDE L. (RRP1.14)
4)
Remove the COVER SIDE R. (RRP1.9)
5)
Remove the CHUTE ASSY TURN. (RRP3.1)
6)
Remove the LINK ACTUATOR (RRP 3.17).
7)
Remove the COVER CASSETTE REAR. (RRP3.2)
8)
Remove the FEEDER ASSY UNIT. (RRP3.3)
9)
Remove the PICKUP ASSY. (RRP3.12)
10) Remove the connector (P/J473) on the SENSOR PHOTO:LOW PAPER.
11) Release the hooks at 3 positions securing the SENSOR PHOTO:LOW PAPER to the PICKUP ASSY
(PL3.3.1).
12) Remove the SENSOR PHOTO:LOW PAPER from the PICKUP ASSY.
Replacement
Replace the components in the reverse order of removal.
Figure: SENSOR PHOTO:LOW PAPER Removal
Chapter 3 Removal and Replacement Procedures
3-169
Advertisement
Table of Contents
Troubleshooting
