Minolta Magicolor 3100 Series Service Manual page 158

RRP3.8 SWITCH ASSY SIZE (PL3.2.4)
Removal
1) Pull out the CASSETTE from the printer.
2) Remove the COVER TOP MAIN. (RRP1.4)
3) Remove the COVER SIDE L. (RRP1.14)
4) Remove the COVER SIDE R. (RRP1.9)
5) Remove the CHUTE ASSY TURN. (RRP3.1)
6) Remove the LINK ACTUATOR (RRP 3.17).
7) Remove the COVER CASSETTE REAR. (RRP3.2)
8) Remove the FEEDER ASSY UNIT. (RRP3.3)
9) Remove 1 screw securing the SWITCH ASSY SIZE from the HOUSING ASSY FEEDER R of the
FEEDER ASSY UNIT.
10) Remove the connector (P/J471) on the SWITCH ASSY SIZE.
11) Remove the SWITCH ASSY SIZE from the HOUSING ASSY FEEDER R.
Replacement
Replace the components in the reverse order of removal.
3-156
Figure: SWITCH ASSY SIZE Removal