Minolta Magicolor 3100 Series Service Manual page 76

FIP-36 Full Stack (Output Bin Full)
Step
Initial check
Check the following for damage.
1
SENSOR FULL STACK condition
Actuator condition
Check SENSOR FULL STACK
Does SENSOR FULL STACK function normally?
2
Using SENSOR FULL STACK diagnostic tool, check by
Diagnostic Input Test.
Check HARNESS ASSY FRONT2 for signal
3
Is P/J139-6PIN <=> P/J139-5PIN +3.3VDC?
Check HARNESS ASSY FRONT2 for signal
4
Is P/J139-4PIN <=> P/J139-5PIN +3.3VDC?
1-76
Check
Yes
With tool
Replace the parts Go to step [2]
concerned Without tool
Go to step [3]
Replace PWBA
Go to step [3]
HNB MCU
Replace PWBA
Go to step [4]
HNB MCU
Replace
HARNESS ASSY
Replace SENSOR
FRONT1A
FULL STACK
Replace PWBA
HNB MCU
No