2.7.8 Read Slave
1)
Press the "Read" button on the screen where the "Slave" tab is selected.
2)
The contents of the Slave NVM are displayed.
2.7.9 Initialize Slave
The data of Slave NVM is initialized.
1)
Click the "Initialize Slave" button, and the following screen will appear.
2)
Click the "Yes" button to initialize Slave.
3)
The message is displayed that initialization of Slave is completed.
Successful termination:
Unsuccessful termination:
2-116
Initialization of Slave was completed.
Initialization of Slave was not completed.