Rrp10.7 Sensor Toner Low (Pl10.1.8) - Minolta Magicolor 3100 Series Service Manual

RRP10.7 SENSOR TONER LOW (PL10.1.8)

Removal
1) Remove the FUSER ASSY. (RRP8.1)
2) Remove the BTR UNIT ASSY. (RRP8.4)
3) Remove the COVER TOP MAIN. (RRP1.4)
4) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
5) Remove the COVER MSI. (RRP1.11)
6) Remove the TRAY ASSY MSI. (RRP1.12)
7) Remove the COVER ASSY FRONT. (RRP1.13)
8) Remove the COVER ASSY FRONT IN. (RRP1.10)
9) Remove the COVER SIDE L. (RRP1.14)
10) Remove the COVER SIDE R. (RRP1.9)
11) Remove the HOLDER TCRU ASSY UNIT. (RRP10.1)
12) Remove the HOLDER TCRU ASSY. (RRP10.2,3,4,5)
13) Remove 2 screws securing the SENSOR TONER LOW to the HOLDER TCRU ASSY (PL10.1.1, 2, 3,
4).
14) Remove the SENSOR TONER LOW from the HOLDER TCRU ASSY.
Replacement
Replace the components in the reverse order of removal.
3-242
Figure: SENSOR TONER LOW Removal