Minolta Magicolor 3100 Series Service Manual page 251

Removal
1) Remove the COVER TOP MAIN. (RRP1.4)
2) Remove the COVER ASSY FRONT HEAD. (RRP1.2)
3) Remove the COVER MSI. (RRP1.11)
4) Remove the TRAY ASSY MSI. (RRP1.12)
5) Remove the COVER ASSY FRONT. (RRP1.13)
6) Remove the COVER ASSY FRONT IN. (RRP1.10)
7) Remove the COVER SIDE L. (RRP1.14)
8) Remove the COVER SIDE R. (RRP1.9)
9) Remove the COVER ASSY TOP PHD. (RRP1.5)
10) Remove the LINK:R. (RRP1.8)
11) Remove the MAIN DRIVE ASSY. (RRP11.5)
12) Remove the DEVE DRIVE ASSY. (RRP11.4)
13) Remove the ACTUATOR I/R. (RRP11.3)
14) Remove 4 screws securing the PLATE ASSY LEVER R (PL11.1.7) from the right side surface of the
printer.
15) Remove the PLATE ASSY LEVER R from the printer.
Chapter 3 Removal and Replacement Procedures
Figure: LEVER DRUM:R Replacement
3-249