Minolta Magicolor 3100 Series Service Manual page 391

Signal line name
EXIT PAPER SENSED(L)+3.3VDC Paper detection signal in fuser by Exit Sensor in FUSER ASSY
FUSER_STS
HEATER ON(L)
AC N
AC L
♦
Heater rated power: 600 ± 30W 100V
♦
Thermostat contact open temperature: 160°C ± 5°C
Chapter 7 Wiring Diagrams and Signal Information
Heat Roll surface temperature data (analog value) measured by
Temp Sensor to determine the fuser control temperature
Heater ON/OFF control signal
Neutral side of AC input from power supply (Heater power supply
voltage)
Line side of AC input from power supply (Heater power supply
voltage)
Description
7-391