Connector [P (Plug) / J (Jack)]; List Of P/J - Minolta Magicolor 3100 Series Service Manual

1. Connector [P (plug) / J (jack)]

1.1 List of P/J

P/J Coordiates
11 J-43
12 I-43
13 H-43
14 J-43
15 H-43
18 H-44
19 H-44
21 I-43
22 J-43
23 I-43
24 H-43
26 H-43
30 H-43
31 J-43
32 H-43
41 I-18
42 J-18
47 J-18
48 I-18
49 I-17
50 J-18
51 J-16
52 I-18
60 I-17
61 J-18
71 B-32
131 B-7
132 B-9
133 D-8
134 D-6
135 C-9
136 C-23
137 F-8
138 B-32
139 B-33
Connects PWBA HNB MCU and PWBA HNB DRV
Connects PWBA HNB MCU and PWBA HNB DRV
Connects PWBA HNB MCU, S-HVPS, FSR2(FSR22) Harness Assembly, Front 2
Harness Assembly and CTD Harness Assembly
Connects PWBA HNB MCU and Controller Board
Connects PWBA HNB MCU and ROS Assembly
Connects PWBA HNB MCU and REGI Chute Assembly (REGI Clutch, REGI
Sensor)
Connects PWBA HNB MCU and Retard Housing Assembly (TURN Clutch)
Connects PWBA HNB MCU and OPFREC Harness Assembly
Connects PWBA HNB MCU and OPEPANE BS Harness Assembly
Connects PWBA HNB MCU and LVPS STD Assembly
Connects PWBA HNB MCU and TMPA Harness Assembly
--
Flash-write
Test-print
Connects PWBA HNB MCU and OHP Sensor
Connects PWBA HNB DRV and PWBA HNB MCU
Connects PWBA HNB DRV and PWBA HNB MCU
Connects PWBA HNB DRV, Pick Up Assembly (No Paper Sensor, Low Paper
Sensor, Solenoid Feed, Clutch Assembly Turn) and Switch Assembly Size
Connects PWBA HNB DRV and Main Drive Assembly
Connects PWBA HNB DRV and DEVE Drive Assembly
Connects PWBA HNB DRV, Chute Assembly Exit (Motor Assembly DUP) and Cover
Assembly Front Head (Fan Fuser)
Connects PWBA HNB DRV and Holder TCRU Assembly (CRU Sensor, Low Toner
Sensor, TNR Motor)
Connects PWBA HNB DRV and Chute Assembly IN (Fuser Drive Assembly)
Connects PWBA HNB DRV and LVPS STD Assembly
Connects PWBA HNB DRV and LVPS STD Assembly
Connects EEPROM Harness Assembly and Plate Assembly Dispenser L (CONN
Assembly CRUM MC)
Connects Chute Assembly Exit (Motor Assembly DUP) and PWBA HNB DRV
Connects Chute Assembly Out (Solenoid Feed MSI) and Front 1A Harness
Assembly
Connects Chute Assembly Out (DUP JAM Sensor) and Front 1A Harness Assembly
Connects Chute Assembly Out (Full Stack Sensor) and Front 1A Harness Assembly
Connects Chute Assembly Out (MSI No Paper Sensor) and Front 1A Harness
Assembly
Connects Front Assembly In (ADC Sensor Assembly) and Front 1A Harness
Assembly
Connects Cover Assembly Front Head (Fan Fuser) and PWBA HNB DRV
Connects Front 1A Harness Assembly and Fuser Assembly
Connects Front 1A Harness Assembly and Chute Assembly Out (Solenoid Feed
MSI, DUP JAM Sensor, Full Stack Sensor, MSI No Paper Sensor)
Chapter 4 Plug/Jack (P/J) Connector Locations
Remarks
4-271