Minolta Magicolor 3100 Series Service Manual page 55

FIP-16 Fuser Failure (Call for Service Fuser Failure)
Step
Initial check
1 Check the following for damage.
FUSER ASY condition
Check FUSER ASSY connector
2 Disconnect the FUSER ASSY connector, and check for
broken or curved pins.
Check FUSER ASSY
3 Check if an error occurs though the FUSER ASSY was
replaced with a new one.
Check
Chapter 1 Troubleshooting
Yes
Replace the parts
Go to step [2]
concerned
Replace the parts
Go to step [3]
concerned
Replace PWBA
End of work
HNB MCU
No
1-55