Rrp12.5 Harness Assy Ac Sw (Pl12.1.11) - Minolta Magicolor 3100 Series Service Manual
Minolta laser printer service manual
Hide thumbs
Also See for Magicolor 3100 Series:
- User manual (204 pages) ,
- Maintenance manual (25 pages)
Table of Contents
Advertisement
RRP12.5 HARNESS ASSY AC SW (PL12.1.11)
Removal
1)
Remove the COVER TOP MAIN. (RRP1.4)
2)
Remove the COVER ASSY FRONT IN. (RRP1.10)
3)
Remove the COVER SIDE R. (RRP1.9)
4)
Remove 1 screw securing the earth of the HARNESS ASSY AC SW to the LVPS STD (PL12.1.10)
from the printer.
5)
From the printer, release the hooks at 2 positions securing the GUIDE HARNESS SW to the switch
bracket on the LVPS STD and shift the GUIDE HARNESS SW upward.
6)
Shift the switch of the HARNESS ASSY AC SW from the switch bracket of the LVPS STD.
7)
Remove the connector (P/J161) on the LVPS STD.
8)
Releasing the hooks at 2 positions securing the socket of the HARNESS ASSY AC SW to the rear of
the LVPS STD and pull out the socket rearward.
9)
Remove the HARNESS ASSY AC SW from the printer.
Replacement
Replace the components in the reverse order of removal.
3-262
Figure: HARNESS ASSY AC SW Removal
Advertisement
Table of Contents
Troubleshooting
