RRP3.7
HARNESS ASSY OPFREC (PL3.2.3)
Removal
1)
Pull out the CASSETTE from the printer.
2)
Remove the COVER TOP MAIN. (RRP1.4)
3)
Remove the COVER SIDE L. (RRP1.14)
4)
Remove the COVER SIDE R. (RRP1.9)
5)
Remove the CHUTE ASSY TURN. (RRP3.1)
6)
Remove the LINK ACTUATOR (RRP 3.17).
7)
Remove the COVER CASSETTE REAR. (RRP3.2)
8)
Remove the FEEDER ASSY UNIT. (RRP3.3)
9)
Shift the harness of the HARNESS ASSY OPFREC from the HOUSING ASSY FEEDER R of the
FEEDER ASSY UNIT.
10) Release the hooks at 2 positions securing the HARNESS ASSY OPFREC to the HOUSING ASSY
FEEDER R.
11) Pull out the HARNESS ASSY OPFREC downward from the HOUSING ASSY FEEDER R.
Replacement
Replace the components in the reverse order of removal.
Figure: HARNESS ASSY OPFREC Removal
Chapter 3 Removal and Replacement Procedures
3-155