Minolta Magicolor 3100 Series Service Manual page 29

13) Parts which are always removed to check as indicated in the FIP and procedures for that purpose are
not specifically referred to here. They should be handled carefully.
14) "Replacement" in the FIP indicates replacement of parts which are considered to be the source of trou-
ble to be checked after replacing those parts, assemblies containing them, or parts (HIGH ASSY).
15) In the FIP, the paper pick-up unit by means of the paper tray at the lower part of the printer is referred
to as "try 1", the first level of the paper pick-up unit feeder unit as "try 2", and the second level as the
"tray3".
16) In the FIP, existence and non-existence of Diag tools (maintenance tools,) are distinguished in some
cases. Correct troubles according to the instructions in the FIP.
17) In the FIP, procedures are differentiated depending on specifications. Correct troubles according to the
instructions in the FIP.
18) For optional parts, some troubleshooting procedure may follow the manual for those options, of which
you should take note.
Keep those manuals for the optional parts when required.
Chapter 1 Troubleshooting
1-29