Minolta Magicolor 3100 Series Service Manual page 252

16) Release the hook of the SPRING LEVER 30N (PL11.1.5) hitched over the convex portion of the 4
LEVER DRUM:R from the right side surface of the printer.
17) Remove the LINK LEVER:R (PL11.1.6) from the printer together with the SPRING LEVER 30N.
18) Remove the LEVER DRUM:R from the printer.
Replacement
Replace the components in the reverse order of removal.
In replacing the LINK LEVER R (PL11.1.6), align the SPRING IDT R (PL11.1.12) and the
bottom of LINK LEVER L with the positions shown in the figure (LEVER DRUM:L
Replacement).
3-250