Rrp1.4 Cover Top Main (Pl1.1.9) - Minolta Magicolor 3100 Series Service Manual
Minolta laser printer service manual
Hide thumbs
Also See for Magicolor 3100 Series:
- User manual (204 pages) ,
- Maintenance manual (25 pages)
Table of Contents
Advertisement
RRP1.4
COVER TOP MAIN (PL1.1.9)
Removal
Before removing the COVER TOP MAIN, remove the PHD and toner cartridges.
1)Remove the COVER TOP (PL1.1.8) from the printer.
2)
Release the latch at B from the printer and open the CHUTE ASSY OUT (PL6.1.1).
3)
Open the COVER ASSY TOP PHD (PL1.1.10) from the printer.
4)
Remove 2 screws securing the COVER TOP MAIN (PL1.1.9) to the printer.
5)
Release the hooks at 4 positions securing the rear of the COVER TOP MAIN to the printer.
6)
Raise the COVER TOP MAIN slightly from the printer and extract the left front edge of the COVER
TOP MAIN deflecting it leftward.
7)
Remove the COVER TOP MAIN from the printer.
Replacement
Replace the components in the reverse order of removal.
3-126
Figure: COVER TOP MAIN Removal
Advertisement
Table of Contents
Troubleshooting
