Removal Of The Main Motor And Ph Section Cooling Fan Motor - Minolta Di151 Service Manual

FrameMaker Ver.5.5E(PC) Di151 DIS/REASSEMBLY, ADJUSTMENT
00.03.21
(5)

Removal of the Main Motor and PH Section Cooling Fan Motor

Remove these parts after the upper half of the copier, and I/C has been removed.
1. Protective cover
2. Master Board
Master Board
Protective Cover
4007D046AA
3. Base plate
D-27
4. Rear side plate fixing screws (marked with black dots)
5. Gear Assy fixing screws (marked with black squares)
4007D035AB
6. Rear side plate, gear assy
Gear Assy
Rear Side Plate
4007D037AA
NOTE
Install the rear side plate first, then the base plate.
D-28