Configuring The Wireless Network - Kyocera 1102R73AS0 Operation Manual

Installing and Setting up the Machine > Network Setup

Configuring the Wireless Network

When the wireless network function is available on the machine and the connection settings are configured, it is possible
to print or send in a wireless network (wireless LAN) environment. The configuration methods are as follows:
Configuration Method
Configuring the Connection
from the Operation Panel on
This Machine
Setting the Connection by
Using the Wi-Fi Setup Tool
Configuring Connections on
the Web Page
NOTE
On a model with a Wi-Fi function, change the settings in "Primary Network (Client)" appropriately if you switch to other
than a wired network interface.
Interface Block Setting (page 8-36)
Setting the Connection by Using the Wi-Fi Setup Tool
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to the machine, connect the computer or handheld device
with the machine locally. The connection methods are wired connection via LAN cable and wireless LAN connection
(Wi-Fi Direct).
NOTE
• Before using the Wi-Fi Setup Tool, connect your computer to this machine locally with wired LAN cable or Wi-Fi
Direct.
• To use Wi-Fi Direct, confirm that the Wi-Fi Direct is enabled (Wi-Fi Direct is set to [ON]) and Restart Network from
the operation panel, before your computer will be connected to this machine with Wi-Fi Direct.
• To use a wired LAN cable directly connected to the machine, the Auto-IP (Link-local) address will be assigned to the
machine and the computer. This machine applies Auto-IP as the default settings.
• Configure the settings on the operation panel if your computer supports WPS.
Wi-Fi Settings (page 8-26)
Wired Connection by Using LAN Cable
1
Use Quick Setup Wizard when configuring the network in a
wizard-style screen, without setting individually in System
menu.
Use Wi-Fi Settings or Wireless Network to configure the
network in details from System menu.
This is the tool included in the Product Library. You can
configure the connection according to the instructions
provided by the wizard.
The connection can be set from the Command Center RX.
Connect the machine with a computer
1
Connect the machine with a computer via LAN cable when the machine is powered on.
2
Turn on the computer.
IP address (link local address) of the machine and computer is generated automatically.
Description
2-26
Reference Page
Quick Setup Wizard (page 2-35)
Wi-Fi Settings (page 8-26)
Setting the Connection by Using
the Wi-Fi Setup Tool (page 2-26)
Command Center RX User
Guide