Intermediate Housing Assembly - Yamaha Waverunner VXS VX1800 Service Manual

4. Remove the circlips "1", and then remove
the ball bearing "2" using a press.
1
1
Needle bearing attachment "3"
90890-06654
Needle bearing installer "3"
YB-06434

Intermediate housing assembly

Do not reuse a thrust washer, always re-
place it with a new one.
1. Install a new circlip (rear) "1".
2. Install a new ball bearing "2" until it con-
tacts the circlip (rear) "1" using a press.
2
Needle bearing attachment "3"
90890-06654
Needle bearing installer "3"
YB-06434
3. Install a new oil seal "1".
3
2
1
3
1
Needle bearing attachment "2"
90890-06654
Needle bearing installer "2"
YB-06434
Distance "a"
6.5 ± 0.2 mm (0.26 ± 0.01 in)
4. Install the intermediate drive shaft "1" us-
ing a press.
Do not press the intermediate drive shaft
directly.
2
Bearing attachment "2"
90890-06728
Bearing attachment "2"
YW-06728
Distance "a"
46.0 ± 0.5 mm (1.81 ± 0.02 in)
5. Install a new circlip (front) "1", and then in-
stall a new oil seal "2".
6-21
Intermediate housing
2
1
a
a