3. Hold the flywheel magneto "1" using the
special service tools "2" and "3", and then
loosen the special nut "4".
TIP:
• Loosen the special nut "4" until it can no lon-
ger be turned.
• Use a hexagon bit socket "5" with a length of
150 mm (5.91 in) or more and a width across
flats of 12 mm.
3
5
2
4
5
Shaft holder "2"
90890-06721
Shaft holder "2"
YW-06721
Drive handle "3"
90890-06722
Drive handle "3"
YW-06722
4. Hold the flywheel magneto "1" using the
special service tools "2" and "3", and then
remove the transfer shaft "4" using the
special service tool "5".
1
2
1
3
5
5
Shaft holder "2"
90890-06721
Shaft holder "2"
YW-06721
Drive handle "3"
90890-06722
Drive handle "3"
YW-06722
Crankshaft holder "5"
90890-06732
Crankshaft holder "5"
YW-06562
5. Remove the flywheel magneto "1" and
Woodruff key using the special service
tools "2" and "3".
2
3
5-59
Generator cover
4
2
1
2
4
1
1