1. Remote control receiver antenna
2. Remote control receiver lead
3. Fuel tank breather hose (water separator
to ventilation socket)
4. APS lead
5. Steering cable
6. Wire harness
7. Speed sensor lead
8. Negative battery lead
9. Positive battery lead
10. RiDE motor lead
11. Fuel tank breather hose (fuel tank to
water separator)
12. RPS lead
13. Handlebar switch lead (left)
14. Trim switch lead
15. Cooling water pilot outlet hose
16. Buzzer lead
17. Steering sensor lead
A. Route the remote control receiver
antenna under the ventilation hose.
B. Fasten the RiDE motor lead at the yellow
tape using the hook.
C. Fasten the RiDE motor lead at the yellow
tape using the plastic tie.
2-15
Cable and hose routing