Anode Check; Oil Pan Assembly; Oil Separator Tank Cover Installation - Yamaha Waverunner VXS VX1800 Service Manual

Anode check

1. Check the anode. Replace if eroded.
Clean if there is grease, oil, or scales.
Do not apply grease, oil, or paint to the an-
ode.

Oil pan assembly

1. Install the grommet "1" onto the oil pipe "2".
2. Install a new gasket "3", the oil pipe "2",
and the washers "4", and then tighten the
oil pipe stay bolts "5" temporarily.
2
3
5
4
3. Tighten the oil pipe bolt "1" to the specified
torque for the 1st stage.
4. Tighten the oil pipe stay bolts "2" to the
specified torque, and then tighten the oil
pipe bolt "1" to the specified torque for the
2nd stage.
2
1
1
Oil pipe bolt "1"
1st: 0.3 Nm (0.03 kgf·m, 0.2 ft·lb)
2nd: 12 Nm (1.2 kgf·m, 8.9 ft·lb)
Oil pipe stay bolt "2"
9 Nm (0.9 kgf·m, 6.6 ft·lb)
5. Install the baffle plate "1", and then tighten
the baffle plate bolts "2" to the specified
torque.
6. Install a new gasket "3" and the oil pan
plug "4", and then tighten the oil pan plug
"4" to the specified torque.
1
Baffle plate bolt "2"
12 Nm (1.2 kgf·m, 8.9 ft·lb)
Oil pan plug "4"
20 Nm (2.0 kgf·m, 14.8 ft·lb)

Oil separator tank cover installation

1. Install a new gasket "1" and the oil separa-
tor tank cover "2", and then tighten the oil
separator tank cover bolts "3" and "4" in the
order [1], [2], and so on.
5-71
Oil separator tank and oil pan
2
3
4
3
4
2
1