6. Add the recommended engine oil up to the
specified level through the oil filler hole.
Recommended engine oil
YAMALUBE 4W or 4-stroke motor oil
Recommended engine oil grade API
API SE, SF, SG, SH, SJ, SL
Recommended engine oil type SAE
SAE 10W-30, 10W-40, 20W-40, 20W-
50
Engine oil quantity without oil filter re-
placement
3.5 L (3.70 US qt, 3.08 Imp.qt)
Engine oil quantity with oil filter replace-
ment
3.6 L (3.81 US qt, 3.17 Imp.qt)
7. Install the oil filler cap and oil level gauge.
8. Check the engine oil level. See "Engine oil
level check" (3-4).
Oil filter replacement
1. Extract the engine oil. See"Engine oil re-
placement" (3-4).
2. Place a rag under the oil filter "1".
3. Remove the oil filter "1".
2
1
1
3-5
Oil filter wrench "2"
90890-06830
Oil filter wrench "2"
YB-06830
4. Install the oil filter "1", and then tighten it to
the specified torque.
TIP:
Make sure to clean up any oil spills.
Oil filter wrench "2"
90890-06830
Oil filter wrench "2"
YB-06830
Oil filter "1"
18 Nm (1.8 kgf·m, 13.3 ft·lb)
5. Check the engine oil level. See "Engine oil
level check" (3-4).
Intermediate housing lubrication
1. Lubricate
the
through the grease nipple "1".
Recommended lubricant
YAMALUBE MARINE GREASE
Spark plug check
1. Remove the spark plugs.
Periodic service
1
2
intermediate
housing
1