Impeller Duct, Impeller Housing, And Nozzle Installation - Yamaha Waverunner VXS VX1800 Service Manual

6. Install the washer "1", and then tighten the
drive shaft nut "2" to the specified torque.
7. Apply EPNOC grease AP #0 to the inside
of the cap "3", and then install a new O-ring
"4" and the cap "3".
1
5
Drive shaft holder 6 "5"
90890-06520
Driveshaft holder "5"
YB-06201
Drive shaft nut "2"
74 Nm (7.4 kgf·m, 54.6 ft·lb)
Grease quantity
20 g (0.7 oz)
8. Install the O-ring "1" to the spacer "2".
9. Install the spacer "2" and impeller "3".
1
3
2
10. Tighten the impeller "1" to the specified
torque.
4
3
2
EP
LT
572
2
Impeller, drive shaft, and impeller duct
2
Drive shaft holder 6 "2"
90890-06520
Driveshaft holder "2"
YB-06201
Impeller "1"
330 Nm (33.0 kgf·m, 243.4 ft·lb)
Impeller duct, impeller housing, and
nozzle installation
1. Clean the mating surfaces of the impeller
duct, impeller housing, and nozzle.
2. Apply sealant to the mating surfaces of the
impeller duct "1" and impeller housing "2".
3. Install the dowel pins "3", and then install
the impeller housing "2".
2
4. Apply sealant to the mating surfaces of the
nozzle "1" and impeller duct "2".
5. Install the dowel pins "3" and nozzle "1".
6. Install the bracket "4", and then tighten the
impeller duct bolts "5" to the specified
torque.
6-14
1
3
3
1